Day 5 at RIVERSIDE

Day 5 at RIVERSIDE
work done by: Riverside. Race/Rally Preparation, Engine rebuild and Competitive Parts. Mr. Loqy Siregar.
http://www.facebook.com/profile.php?id=561148403

head being inspected. based on mr. B.P. Kusumo Bintoro, a resourceful and helpful senior member of BMWCCI, he informed me that up to 0.3mm shaving is allowed. my M20B25 head was put against glass and measured with gaping tools and some area have gap of 0.09mm so i still can shave it


RIP (rusted into pieces)


close up of one of the valve and head dome


clean clean scrub scrub


the block is cleaned and measure. cylinder 3 and 4 is 'oval' because of the heat... meaning that the diameter is not 84mm all around, there are some 0.2mm differences on the different diameter orientation.



now back to rust... left front subframe today




inside view of the left frame


closer...


the main roll cage loop was made first...


interior in progress...


working on the left front floor panel now


left floor panel made to fit, waiting to be welded on


next target :O




Wing donated from Qui Ngo, and the Sparco Sprint i bought sometime ago... waiting patiently to go in



in front of my BIMMO, there was koko's E30 4 door, converted into 2 doors and pumped guard


comparison of my guard and his guard hahaha


mr Loqy the evil mastermind of this project... muahahaha


and his loyal accomplish