TRACK PREPARATION PART3 DAY2

TRACK PREPARATION PART3 DAY2
to do: fix radiator drain plug, wheel alignment, install wing

i went to 3 wreckers to find the replacement drain plug, kam message me while i am searching for it. but i have finally found the plug, thanks anyway kam!


so i finish the coolant flush and bleed the coolant system. once i am done, i went straight to the alignment place near home... tyrepower @ burwood highway, wantirna south.


after alignment done:


admiring my nardi *kiss kiss*


the car is basically ready, but only one thing left to do the wing!!! hahahahaha i know it gonna look **** but i need it to keep the now lighter tail down, esp at the winton sweeper...


i called mark to come over and help me hold the wing while i measure it on the boot lid




now drill!!!!


and test mount


and the finally mounting gay wing


now pay my loyal slave with pizza dinner


while me and mark trying to mount the wing, we tried to cut one of the bolt with bolt cutter because its too long, and make the wing uneven... the result is bolt 1 : bolt cutter 0


now that all is done, i do the finally touch to matte black the chrome window trim... but i ran out of paint halfway so i only do the lower trim hahahaha


done left and right matt black lower window trim


and by the time i am done it is already 3am, and i have to drive up to winton from 5am... o_O so i only have 2 hour sleep since 19th of November, and now is 21st of November...

*sigh* red bull fix everything right?

TRACK PREPARATION PART2 DAY1

TRACK PREPARATION PART2 DAY1
towbar removal, nardi, strip back interior trim, bleed the brake, negative camber, coolant flush and intake mod

i hate you... grrrrrr!!!


this is the bar that kill my back spine... the root of the problem hahaha


out off the car now *ouch* my back start aching


i love you

got this off laura, 300mm deep corn nardi thank you laura!

remove the old steering wheels


put the nardi on the boss kit


its in!!


remove the rear seat and rear door trim


bleed the brake fluid system


set to max camber


i make intake funnel from PVC pipe, heated it up and push it against plastic funnel...


i also removed the front left and right light surround and paint it matte black, and removed the left high beam (the intake box is behind it) and put the funnel i made in its place...



lastly i ended the day with replacing the coolant system with fresh one... but i over torque it and broke the plastic... yes plastic drain plug... :O


i panicked and msg kam coz i know he has dead E30 lying around somewhere hahaha... but of course he slept already (its 5am)... so i slept for 2 hours and wakes up around 7am, to look for wrecked E30 in the local pick-a-parts wrecker...

to be continued...