haven't post any update for a while, so here we go:
Steering Bushing
was on the highway, and the steering felt abit laggy and over bumps the car would go left or right and i have to keep making small adjustment... i thought one of the wheel was loose, ball joint, tier rod etc.... but then jack up the car and everything was solid, no movement... then when i put the car back down, the steering wheel has little play, and i found that the bushing connecting 2 piece of steering rod has shattered... ![]()
broken bushing out
replacement in
costed me Rp.90,000... around $12AUD
HID 8000k
i dont usually do this but the old wiring on the E30 starting to stresses me out, one bumps and one light goes out, another bump it goes back on and the other one goes out, sometimes both... i have retighten all the connector with pliers and still happening... got this
costed me Rp. 850,000... around $100AUD installation costed me Rp. 150,000 around $18AUD
Tune up the valve clearance and AFM
the car idles funny on traffic jam again, and finally bring the car for tune up and check up. result:
- valve clearance out of adjustment
- TB position sensor came off o_O!!!!
- rocker cover gasket leaking oil...
costed me:
- rocker cover gasket replacement Rp.130,000 ($16AUD) installed
- tune up Rp. 150,000 ($18AUD)
ZF type LSD from E36 325, and 4.1 final drive + pinion installation
installed by CAD&RMC in kelapa gading, 200m from my house
thx to Alvin and Iwan.
open the diff and take all the parts out for inspection.
open diff left (M40 E30), ZF LSD E36 right (clutch type)
diff all assembled and installed back to the car...
they also cut MDF for custom audio install and this is what happened to my car after few hours ![]()
at least they made a list, handwritten or not, they didn't miss any request ![]()
Changed Fluids and Oil
i am using this fluid for the LSD, never heard the brand but supposed to be good...
i also change the gearbox fluid to Redline MTL... (no picture yet)
and the engine oil to massimo RACING 3 10W40... never heard as well, but its supposed to be very good... ![]()
LOL
appearently it was stuck!:
Thursday, July 08, 2010
Long needed update! :) HID + LSD + Tune Up + Steering Bushing
Posted by
Silas
at
12:53 PM
0
comments
Labels: Bimmo 325 E30
BATTERY DIED, LOWERED, & TINTED
BATTERY DIED
well, i went to melbourne for just abit over a month, and i was gonna take off my battery as usual, but my dad say, don't bother, i will warm it up everyday... and then somehow he forget to keep warming up the car every few days... when i arrived back in jakarta... the car has no more charge in the battery ![]()
replaced that... damn u!!!!!!
LOWERED ABIT
ok.... ordered this set of custom spring... yep... indo sell spring in meters long and they have any width, thickness, coil distance, etc for almost any car... almost... but the spring rate, only GOD and the spring itself who knows the exact spec... ![]()
BEFORE:
AFTER:
total drop right after change: F 5cm, R 4cm
total drop after 1 day: F 8cm, R 6cm LOL
after lowering camber and alignment: total toe front out 1mm, 1m toe in rear, rear camber -2.8 front -2
DAMN YOU INDO SUN!!
constant 2-3 hours bumper to bumper daily traffic in jakarta has not only caused problem with the car over heating... but also me!
the car i bought came with super thin mirror tint... as you can see in previous daytime lowered pic... and below at night... everyone can see me inside! not so safe for jakarta ![]()
so tinted it with 3M darkest 90% side and back (in indonesia % means how many light blocked, unlike in australia % is the visibility, hence in indo higher % means darker, and 100% means black out)... and fron i use 40% mirror tint...
now i have to wind down the window if i want to reverse park at night... but in most places in jakarta, we got 'tukang parkir' : which are people who work at the carpark and stand beside you car when you park and give warnings... "keep going, abit more abit more.... stop"
that is also why rear parking sensor sale is not so good here...
Parts & Maintenance: * replace Long Tier Rod (RH)
* replace Long Ball Joint bushing (RH)
* replace 2 lower control arm bushing (RH/LH)
and few more but waiting for parts...
ordered and waiting for shipping:
* Steering rubber joint
* Idle Up controller
next upgrade:
* wheels... i found this second hand racing dynamics... what do you guys think of it? 16x7.5 (my current one is 16x7), offset +20, my current one is +35...
i quickly photoshopped it... hmm not too bad if its bronze or black... i just dont like the rounded edge...
price: $300USD ono (in rupiah of course...)
Posted by
Silas
at
12:51 PM
0
comments
Labels: Bimmo 325 E30
VIDEO AND PHOTOS from Winton 23rd May 2010
here are the video of my best lap chasing amills (adam) AW11:
Photo courtesy of Mugsee Photography & Kreative-Studio.com

Posted by
Silas
at
12:14 PM
0
comments
Labels: AHIRU - micralicious
MICRA K11 Data Logging from Winton
ok... THANK YOU for the graph ken!
using mac has making me lazy extracting racechrono data hahahaha
![]()
this is the data from race chrono... i think its showing 1:50.2s
Best Lap Graph...
Best Lap VS Optimum Lap
Hi Lo Speed
thx again ken... it shows that 1:49 is within reach... i just have to drive more consistent i guess... and fix the wheel hop! ![]()
Posted by
Silas
at
12:08 PM
0
comments
Labels: AHIRU - micralicious, Micra K11 - Track Records, TRACK RECORD
EXE CREW TRACKDAY @ WINTON - 23rd May 2010
EXE CREW TRACKDAY @ WINTON - 23rd May 2010 Previous PB @ winton: 1:54.4650 Current PB @ winton: 1:50.0600 overall result of the day: http://www.natsoft.com.au/cgi-bin/results.cgi?23/05/2010.WIN.S6.Y the track related spec are: Header, catback, K&N intake, brand new adrenalins 185/60/14, K-Sport coilover, Camber bolts, remove back seat and spare tyres... alignment: total front toe -1mm front camber L -3.3 R -3.2 rear camber L 0 R -1 total rear toe +4.7 its been 1 year since i have been to winton in the micra, and this is my 3rd time in winton with micra... Session 1 this was the practice session... quite a bit of traffic and had to overtake few cars.... micra is bad at overtaking so i am thanking everyone that letting me pass by slowing down on the straight... i got 1 free lap at the last lap and i was lucky to break my previous PB by more than 2 seconds... pretty surprised when shaun told me... 1:56.4900 1:52.3280 1:52.3950 1:52.3840 1:51.9380 Session 2 *TIMER NOT WORKING* sayaka was in the car as passenger... it was a good lap and according to race chrono i was doing around 1:52s.... i only have few laps as i had to pull out due to my bonnet latch opening halfway after few ripple strip hopping... 8:15.2700 - LOL Session 3 *Fix the timer position* few traffics along the track... no clean lap... but overall still good fun... however the car starting to feel abit slippery... so i decided to check my tyre pressure afterwards and it was 40 psi... o_O hahahaha so i knock it back down to 38psi.... 2:05.8740 1:53.9600 1:54.3100 1:52.6860 1:53.7210 2:00.9690 Session 4 this session i had 4 quite clean lap as i only have to overtake 1 car each lap and everyone was so nice to let me pass right away... 2:00.3360 1:54.7620 1:52.8440 1:52.6550 1:52.4980 1:52.1480 Session 5 with Jules as passenger in the car... this was one of the most busiest lap but extremely fun lap as i slide more than 10 times and did massive slide on turn 4 and lucky enough to held it all the way like a RWD lol... it was so much fun that me and jules spent most time giggling and yelling hahahaha... it was a shorter session also my slower one as i spent most time sideways than straight... so i decided to check the pressure and all the outer tyres (left) jump to 42psi and the inside tyres (right) was 40-41... moral value: sliding = tyre temp + pressure goes up 1:54.4430 1:54.1820 1:54.0490 1:59.9340 1:57.9490 Session 6 decide to do it alone this time... i put the pressure all the way down to 32psi... and it works like a treat.... i was thinking higher pressure works well for street tyres... i guess i was wrong... will stick with 32psi hot next time around. it was the combined session of A B C... it was the best session of the day for me... and i was taking turns with adam's AW11 to lead and follow... that one happened to allow me to do my fastest lap of the day while racing adam... 1:54.8890 1:52.7500 1:51.3590 1:53.7050 1:50.0600 1:53.2720 by the end of the session, my brake was cooked... the brake pad is nearly gone, the brake fluid overflow and the brake feel spongy along the way home... will need replacing soon... this is one of the best trackday i've ever been and i have missed all my adrenalin fixes for a year it felt so good to be back!!! feedback from the new mods installed: header - alot of top end pulling power and ahiru didn't ran out of breath anymore... keep pulling till the limiter... catback - raspy and knocking the arms... hahaha bad! but works so i cbf changing it again... the negative camber really makes the car turn at higher speed... i felt it so planted to the ground even when i feather or flick it around... the car become extremely easy to drive fast around the corner... just point and shoot the coilover - i am a noob in coilover settings, so i just set to the hardest... in the future i will raise it abit more because at the moment it bounce around at the corner exit, and that costing me time... i reckon once that fixed i can be in 1:50 more consistently... the adrenalin 185/60/14 - lol this is just the right amount for the micra at this stage... my first trackday with the worn old tyres was enough for the soft stock suspension, but then the semis i borrowed from darrin for my 2nd trackday was bogging the car alot on the exit (too much grip?) so i am 90% happy with the car atm... just need to fix the bouncing at the exit, better brake pads and brake fluid and abit more power hahaha |
Posted by
Silas
at
12:08 PM
0
comments
Labels: AHIRU - micralicious, Micra K11 - Track Records, TRACK RECORD

